280Ah vs 314Ah LiFePO4 Cells: Which Is Better for a DIY Home Battery?
The two cell sizes share almost the same dimensions, but 314Ah stores about 12% more energy. Compare specs, pack energy and cost per kWh.
Short answer: choose 314Ah when space is limited and you want the most energy per cell. Choose 280Ah when it costs less per kWh for the set you need and the extra energy is not essential. They are almost the same size, so one does not take more room than the other.
The specs side by side
| EVE 280Ah | CATL 280Ah | EVE 314Ah | CATL 314Ah | |
|---|---|---|---|---|
| Nominal energy | 896Wh | 896Wh | 1004.8Wh | About 1004.8Wh |
| Size (mm) | 173.7 × 71.7 × 207.2 | 173.9 × 71.7 × 207.2 | 173.7 × 71.7 × 207.2 | 174 × 71.65 × 207 |
| Weight | 5.49 kg ± 0.3 | 5.34 kg ± 0.3 | 5.6 kg ± 0.3 | ≤5.51 kg |
Figures are from our product listings. Confirm against the cell maker's datasheet before you finalise a design.
How much energy you get

Nominal energy is voltage × capacity, so a 16-cell 51.2V pack with 314Ah cells gives 51.2 × 314 = 16.08kWh. You will not use all of it. If you limit your system to 90% depth of discharge, for example, you get about 14.5kWh from 314Ah cells and 12.9kWh from 280Ah cells.
Cost per kWh
Bigger is not automatically better value. Here is what a 16-cell set costs in our store:
| 16-cell set | Price (USD) | Energy | Per kWh |
|---|---|---|---|
| EVE 280Ah | $1,130.75 | 14.34kWh | About $79 |
| CATL 314Ah | $1,345.89 | 16.08kWh | About $84 |
| EVE 314Ah | $1,420.67 | 16.08kWh | About $88 |
| CATL 280Ah | $1,272.00 | 14.34kWh | About $89 |
Prices were checked on 7 November 2026 and may change. Check the product page for the current price in your currency.
Things that matter more than the size
- Your box and BMS. Our 51.2V box and 12.8V box are listed for 280, 304, 314 and 320Ah cells. A 200A BMS on a 51.2V pack allows about 10kW, whichever cell you choose.
- Do not mix cells. Use the same capacity and brand throughout a pack.
- Cycle life claims. Sellers quote different figures under different test conditions. Compare depth of discharge, current, temperature and end-of-life capacity, not the headline number.
- Charging temperature. Do not charge LiFePO4 cells below 0°C, because lithium plating can raise the risk of an internal short circuit. Battery makers may set a narrower range, so follow your own battery's limits.
Quick decision
| Your situation | Better fit |
|---|---|
| You need the most energy from 16 cells | 314Ah |
| You want the lowest cost per kWh right now | Compare the table above |
| You are matching an existing 280Ah pack | 280Ah, in a separate pack; ask your inverter and BMS maker about paralleling |
Next steps
See 314Ah cells, 280Ah cells, or our assembled packs if you would rather not build one.
Sources
- EverExceed, why LiFePO4 batteries cannot be charged below 0°C
- Victron Energy, lithium battery charging temperature range
Last reviewed 7 November 2026. This guide is general information, not design or installation advice.